Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
Joined
·
792 Posts
Couple different ways to do it.

You can take every thing from a CJ jeep and it will bolt right up to your dana 44. Knuckles brakes and everything will swap over. You will then need to track down some scout outer shafts. The scout 44 shafts will work with all the CJ stuff.

You can use knuckles brakes and shafts from a scout 44.

The best option is to get a set of what they call "small" chevy spindles. I have a set somewhere. They are off the older model chevy 44's. You would need to search for the specific years. Then get a set of chevy dana 44 flattop knuckles...standard chevy knuckles would work but might as well get the flattops. With the small spindles you can use the 5 on 5.5 hardware from a ford TTB off dana 44 to get what you want, this is the best way to get high steer.

And you could just take everything from a ford F150 bronco.
That should give you an idea as what to search for.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top