Pirate 4x4 banner
1 - 9 of 9 Posts

· Registered
Joined
·
1,326 Posts
Discussion Starter · #1 ·
I have some pieces coming off my truck that may save someone several hours and a few dollars. I have 2 coil buckets that were used to hold TJ coils. $50 for the pair. I have the front 4" lift TJ coils. $40 for the pair. Also have 2 huge hiems. These are 1" I.D. bearings. They have no slop at all and are rated for 70,000 lbs. $70 for both. All prices are best offer + shipping.




 

· Registered
Joined
·
3,974 Posts
Did you cut the ends with a torch on the heims? And whats the total shank measurement?
 

· Registered
Joined
·
1,326 Posts
Discussion Starter · #3 ·
No, that is anti-sieze that I did not wipe off. I believe they are 6" total hieght and 2.5 shank. The nut is all the way up on the threads. I'll try to get some better shots of them. For the record, the buckets were cut off using a plasma.
Lator.....
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top