Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
3,130 Posts
If you want unbendable links they should probably be .5" wall, but even that will bend eventually. It doesn't take very much to bend .250" wall. OD is also a factor, the bigger the OD the less likely to bend.

Heim vs. bushings, both will work but heims will allow for more misalignment. If you are going to run bent links for clearance or mount your shocks to the links, then bushings work to keep the links inline.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.