Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
116 Posts
Discussion Starter · #1 ·
O.K I have a 92YJ with 2.5l motor, 5speed, no a/c. I'm getting codes:

12= not listed in my POS Chilton manual

33= A/C clutch relay (I don't have A/C so I don't have a relay for it)

55= end of code output

The maint. required light came on my dash today but engine runs fine. I ran the codes 4 times and I'm getting the same codes each time so basically I'm kind of lost. Any help would be appreciated. Thanks. <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
116 Posts
Discussion Starter · #4 ·
O.K. I learn something new everyday! I guess it's time to buy a scanner or take it to the dealer which sucks! <IMG SRC="smilies/crybaby2.gif" border="0"> So what about the codes that I am getting? Are they B.S. or what? Thanks.
 

·
Registered
Joined
·
116 Posts
Discussion Starter · #5 ·
Well I found the info in my manual. 90 and earlier models do have a time under the dash. 91 and later need to be reset with a special tool after replacing the oxygen sensor. Thanks for the help.
 

·
Registered
Joined
·
116 Posts
Discussion Starter · #7 ·
Originally posted by BellyUp:
<STRONG>12 means that your battery was disconnected within the last 150 startups.

33 is the o2 sensor


55 is end of codes.</STRONG>
Thanks, that makes more sense than what I've got in my Chilton manual. God I need to buy a real factory service manual.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top