Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
My first thread so please excuse me if its kind of rusty.
I have a 1991 toyota pickup and before removing body lift
power steering was working perfectly fine (excluding the
leak from steering box). After removing body lift I had no power
steering at all. Is there a way to check it the culprit would be the
pump or the steering box. I rechecked everything and there was
no crimped lines at all. Help would be greatly appreciated.
 

·
Premium Member
Joined
·
555 Posts
i checked mine for hydro steering by puttin a pressure guage in line coming out of the pump. it was only putting out 400-500 psi and the new pump put out around 1300 psi.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #5
Had some time to inspect the truck today and
everything seems to be intact. Is there a way or test
to check if its the pump? I can feel a little help with the
power steering because the wheel is not so hard to turn.
 
1 - 5 of 5 Posts
Top