Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
Joined
·
3,942 Posts
the axle shafts are the same spline count but you can't use the long side shaft because of the disconnect. However TJ shafts are the same length, have no disconnect and use a bigger U-joint. Yoiu could then use scout dana 44 stub shafts and would have bigger U-joints in your axle and it will all work with your stock outers.

P.S. "Lengthening" the housing sounds scary, retubing is the right way to do it but welding can work if this guy honestly knows what the hell he is doing.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top