Pirate 4x4 banner

1 - 11 of 11 Posts

·
Registered
Joined
·
2,993 Posts
Discussion Starter #1
Running coilovers in the rear with a 4-link, just got to figure out how <IMG SRC="smilies/biggrin.gif" border="0">

<IMG width=444 height=588 SRC="http://www.pirate4x4.com/ubb/uploads/latest1.jpg">

<IMG width=444 height=588 SRC="http://www.pirate4x4.com/ubb/uploads/latest2.jpg">

<IMG width=638 height=877 SRC="http://www.pirate4x4.com/ubb/uploads/latest3.jpg">
the excess will be cut off the nurfs.

any input would be apriciated

[ 08-31-2001: Message edited by: ToyFamily ]

[ 09-01-2001: Message edited by: ToyFamily ]
 

·
Super Moderator
'82 Scrambler, '14 Rzr
Joined
·
62,007 Posts
Looks just the cab I am gonna be using... red and all <IMG SRC="smilies/eek.gif" border="0">
 

·
Registered
Joined
·
94 Posts
You didn't go to Susan's?
I'm trying to get my shiot finished, cause I think I am going to Fordyce on the 9th?

[ 08-31-2001: Message edited by: zesty_toy ]
 

·
Registered
Joined
·
27,885 Posts
those nerfs kick ass! ive got a set of yours rock tested!!! <IMG SRC="smilies/bender.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/bender.gif" border="0">
 

·
Registered
Joined
·
2,338 Posts
Looks real nice. But the roll-bar is going to hit the back of the cab going down the highway with a load of gear and a little un-even pavement. My truck frame didn't flex hardly at all when I first got it...but over the years of wheelin it has gotten flexier.....that's probably not a good thing. Hehhehehee


Btw, any pics of how you mount yer nerfs??? I was going to weld mine straight to the frame...but I've seen several bent frames from that. Any ideas?
 

·
Registered
Joined
·
1,415 Posts
looks good <IMG SRC="smilies/biggrin.gif" border="0">
 
1 - 11 of 11 Posts
Top