Pirate 4x4 banner
1 - 20 of 30 Posts

· Premium Member
Joined
·
7,273 Posts
Discussion Starter · #1 ·
Anyone have a good affordable source for LED stop/turn/tail and marker lights for trailers? I don't have any trouble finding them, but most places are extremely proud of them. I realize they're going to be more expensive than incandescent lights, but $40 per light seems a little steep to me.
 

· Premium Member
Joined
·
7,273 Posts
Discussion Starter · #3 ·
do you want flanged type or the slip fit with rubber grommet? i bought a set of LED lights for my flatbed conversrion but they are flange style. They were $19 each at harbor frieght. Work great, real bright output.

Not a bad price on those.... I already have a pair of those flanged style, but those round ones might not work out for me due their diameter. The oval style would fit much better for me. I'm also looking for the little round marker lights as well.
 

· Banned
Joined
·
5,153 Posts
There is a trailer reapir place near me with tolerable prices. look online for utility body parts and you should be able to find some of what you need. i found a few of those and trailer parts places but they couldnt get me the stuff before i left without paying for overnight
 

· Premium Member
Joined
·
7,273 Posts
Discussion Starter · #6 ·

· Premium Member
Joined
·
7,273 Posts
Discussion Starter · #8 ·
That's a pretty good package deal there... I'm looking at this one:



Since it also includes 75' of conspicuity tape that I'll need to replace after I paint the ugly pig. May have to give them a call and see if they can do some substituting on the packages. I could realy use 4 red and 4 yellow marker lights.
 

· Registered
Joined
·
9,780 Posts
I just went all LED on my trailer. This place was about the best prices I've seen. They are MUCH brighter than my old lights. The led taillights are as bright as the old brake lights. The led brake lights...well, if you miss them, you shouldn't be driving.

http://shop.easternmarine.com/
 

· Registered
Joined
·
1,038 Posts
I used Southwest Wheel and the nifty part was that they let me "mix & match" on the lights to get what I wanted while holding the kit discount.
 

· Premium Member
Joined
·
2,516 Posts
I got mine at autozone for $24 and $29 depending on the side. It wasn't the entire kit, I only needed the lights since I was replacing them. They have a deal where if you spend $20 5 times you get $20 back so I bought them on separate days. Effectively, they were $19 and $24 because of that.

BTW, they are submersible. I didn't really need that but it's nice to have.
 

· Premium Member
Joined
·
4,846 Posts
I bought mine from a seller on eBay that goes by the name closer2wholesale I believe. Prices were very reasonable, and shipping was very fast.

Haven't installed them yet, but they look very nice and appear to be well sealed.
 

· Premium Member
Joined
·
7,273 Posts
Discussion Starter · #18 ·
Through all the various sources listed in this thread, I have found pretty much all the lights that I want/need. The exception being a licence plate light. I can't seem to find one listed.
 

· Registered
Joined
·
43 Posts
LED License plate lights...

I was looking for the same thing, found them not in the trailer section, but go to a marine store, go the section where they offer interrior lights. I picked up some little LED - and Waterproof - lights for $15 to $20 each - not really cheap but they work and they're submersible.

Called either "utility strip light" or "LED Multi-Purpouse Light"
one made by Innovative Lighting INC and Seasense was the other manufacturer

Innovative:
http://www.innovativelight.com/3-led-step-light---surface-mount_p_1482_11487_2.cfm
http://www.innovativelight.com/2-led-oval-2.5-multi-purpose-light_p_1482_11515_8.cfm

Here's one of the units from SeaSense
http://unifiedmarine.net/cgi-bin/htmlos.exe/0014.3.3019813837000023311

I purchased mine at Boater's World but I'm sure you could get them at any marine store.
 
1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top