Pirate 4x4 banner
1 - 20 of 21 Posts

·
Registered
Joined
·
278 Posts
Discussion Starter · #1 ·
I'm trying to decide on whether to weld up the spiders in my rear 60 or just buy a lock right. I'm wondering if the lockright will handle the 36's. all i'm running is a 4.2, TF999 and d300 so not to much power to worry about. Trying to do this as cheap as possible but this jeep will have to drive it self to the trails, not a DD but some on road driving will be happening. Kinda worried about tire wear and axle shaft weakening with the lincoln locker.
whatdayathink
thanks alot
ohh and i did search
 

·
Registered
Joined
·
986 Posts
I've had no problem with my rear lockright, I have 4.2l, 4:1 kit Dana300, 4.56 gears, and 38" tires.

-J
 

·
Registered
Joined
·
4,719 Posts
They seem to make a good product so I would say give the lunch box locker a go. They don't work so good in rear 44's because the case breaks due to the load but that is no fault of the lockright.
 

·
Registered
Joined
·
478 Posts
I wasnt aware they made one for a 60. Interesting.
 

·
Registered
Joined
·
1,043 Posts
yes They Do But they Go For 300 Bucks or More

Spools Are Cheap 189 bucks 35 Spline Pretty Stout!!!!

My .02 cents

Adam,,,
 

·
Registered
Joined
·
143 Posts
I agree with Adam" <IMG SRC="smilies/rainbow.gif" border="0">"Ant on this one, get a spool and don't worry bout lincoln lockin it. It will not "weakin" the shafts to do this.

A lockright 60 handling 36's?!?! Hell yea, but why do that when you could get a spool for less?!?

I have a power lock in the rear of mine and I would much rather have gotten a spool!
GO SPOOL OR GO HOME!
<IMG SRC="smilies/massey.gif" border="0">
 

·
Registered
Joined
·
1,043 Posts
Originally posted by massey2kill Osama bin Ladin:
<STRONG> Get a Gay Sticker On you Jeep Like Me!! and don't worry bout STD's . It will not "weakin" Sex Drives I have 8 Std's.

My Butt handling 36 Inch's?!?! Hell yea,
and I would much rather have gotten a Boob Job And Became A He She!!
GO Gay OR GO HOME!
<IMG SRC="smilies/massey.gif" border="0"></STRONG>
Man You are one Sick Puppy!!!! <IMG SRC="smilies/puke.gif" border="0"> <IMG SRC="smilies/puke.gif" border="0">


heheheheheehe <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">
 

·
Registered
Joined
·
7,069 Posts
Originally posted by Adam Ant:
<STRONG> Man You are one Sick Puppy!!!! <IMG SRC="smilies/puke.gif" border="0"> <IMG SRC="smilies/puke.gif" border="0">


heheheheheehe <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"></STRONG>

BWAAHAHAAHHAHAHAAHAHAHAHAHAH!
<IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0">
 

·
Registered
Joined
·
99 Posts
weld it or spool it and quit beein a pussy <IMG SRC="smilies/smile.gif" border="0"> why waste $$ on a lockright for the rear. put it up front! locked f&r is the only way to go <IMG SRC="smilies/flipoff.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0">
 

·
Registered
Joined
·
1,043 Posts
Originally posted by The Rockslut:
<STRONG>
BWAAHAHAAHHAHAHAAHAHAHAHAHAH!
<IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0"></STRONG>
Yea I thought it Was Funny too!!!! <IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0">
 

·
Registered
Joined
·
3,939 Posts
You guys are a buncha fawkin' clowns! I'm supposed to be working and now my cover is blown from laughing so much!!! <IMG SRC="smilies/eek.gif" border="0"> <IMG SRC="smilies/fj.gif" border="0">
 

·
Registered
Joined
·
1,043 Posts
Yah hooooo!!!! <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0">
 

·
Registered
Joined
·
278 Posts
Discussion Starter · #13 ·
I'm just going to weld it and if it breaks or sucks i have a full spare D60 with the same gears and i'll just put a detroit in then.
 

·
Registered
Joined
·
12,465 Posts
Originally posted by RockReadyXJ:
<STRONG>I'm just going to weld it and if it breaks or sucks i have a full spare D60 with the same gears and i'll just put a detroit in then.</STRONG>

Weld weld weld baby!!! Spools are a waste of money <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">
 

·
Registered
Joined
·
1,043 Posts
Originally posted by Keith Strong:
<STRONG>
Weld weld weld baby!!! Spools are a waste of money <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"></STRONG>
Mine was Free <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">

even Better!!! <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

Adam,

[ 10-05-2001: Message edited by: Adam Ant ]
 

·
Registered
Joined
·
143 Posts
Originally posted by Adam Ant:
<STRONG> Man You are one Sick Puppy!!!! <IMG SRC="smilies/puke.gif" border="0"> <IMG SRC="smilies/puke.gif" border="0">


heheheheheehe <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"></STRONG>
Oh you are a tricky one. Have you ever done that trick before? I think that may be the first time I've seen it done.
 

·
Registered
Joined
·
1,043 Posts
Originally posted by massey2kill Osama bin Ladin:
<STRONG>Oh you are a tricky one. Have you ever done that trick before? I think that may be the first time I've seen it done.</STRONG>
<IMG SRC="smilies/innocent.gif" border="0"> <IMG SRC="smilies/innocent.gif" border="0"> uh what Who me????


hehehehehehehehe <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

You are now deemed Rainbow Warrior!!!

I am Gonna ask Lance if You can get this Catagory for You!!!


Adam,,,
 

·
Registered
Joined
·
143 Posts
Originally posted by Adam Ant:
<STRONG> <IMG SRC="smilies/innocent.gif" border="0"> <IMG SRC="smilies/innocent.gif" border="0"> uh what Who me????


hehehehehehehehe <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

You are now deemed Rainbow Warrior!!!

I am Gonna ask Lance if You can get this Catagory for You!!!


Adam,,,</STRONG>
Ask away. <IMG SRC="smilies/rolleyes.gif" border="0">
 

·
Registered
Joined
·
5,477 Posts
Originally posted by XJ Hunter:
<STRONG>weld it or spool it and quit beein a pussy <IMG SRC="smilies/smile.gif" border="0"> why waste $$ on a lockright for the rear. put it up front! locked f&r is the only way to go <IMG SRC="smilies/flipoff.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0"></STRONG>
It's people like this... *shaking my head*
I guess I'm a pussy then. After all, you are what you eat. Ya DICK! <IMG SRC="smilies/thefinger.gif" border="0">

I'm runn'n a lockrite (like the big pussy I am) on 38's and a TBI350 to boot. Not a THING wrong with it. Hooks up like a mutha and if you're like me, I happen to like driving my rig around town. If so, spool or welding (both fine choices) will drive you nuts and just wear tires. With the Lockrite it chirps and bucks a bit, but way less tire scrapage.

Those who bag on Lockrites 90% of the time have never touched one. For the 60, lemme tell ya, it's one beefy ass piece of steel. I installed it in about an hour and it's easy to deal with. SUPER easy. Sure I wanted a Detroit, but I'm on a budget. My shit works great and I paid half the price. I guess that's the mantra of a pussy. <IMG SRC="smilies/rolleyes.gif" border="0">
 

·
Registered
Joined
·
278 Posts
Discussion Starter · #20 ·
I know hunter, hes just raggin on me, he runs LR's front and rear in his XJ and i'm pretty sure he likes them. He's just talkin smack <IMG SRC="smilies/smile.gif" border="0"> I think i'm going to weld it then if it totally sucks on the way to the trails or if it breaks i'll put in a LR or a detroit depending on the cashish
thanks alot for the info

quote:
--------------------------------------------------------------------------------
Originally posted by XJ Hunter:
weld it or spool it and quit beein a pussy why waste $$ on a lockright for the rear. put it up front! locked f&r is the only way to go
--------------------------------------------------------------------------------

It's people like this... *shaking my head*
I guess I'm a pussy then. After all, you are what you eat. Ya DICK!

I'm runn'n a lockrite (like the big pussy I am) on 38's and a TBI350 to boot. Not a THING wrong with it. Hooks up like a mutha and if you're like me, I happen to like driving my rig around town. If so, spool or welding (both fine choices) will drive you nuts and just wear tires. With the Lockrite it chirps and bucks a bit, but way less tire scrapage.

Those who bag on Lockrites 90% of the time have never touched one. For the 60, lemme tell ya, it's one beefy ass piece of steel. I installed it in about an hour and it's easy to deal with. SUPER easy. Sure I wanted a Detroit, but I'm on a budget. My shit works great and I paid half the price. I guess that's the mantra of a pussy.
 
1 - 20 of 21 Posts
Top