Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
WE're going from an auto to a 5speed and nothing has worked out good yet..The auto t-case has the small input and the bearing wont accept the new bigger input without doing some major work on the case..It for a 92 dodge 1ton...Please help!!
 

·
Registered
Joined
·
339 Posts
I think you can buy the larger bearing retainer for the front input. Try Advanced adapters or Klune V. I have heard of doing this for a 32 spline input but not sure for the 29. <IMG SRC="smilies/smile.gif" border="0">
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top