Pirate 4x4 banner

1 - 8 of 8 Posts

·
Registered
Joined
·
2,086 Posts
Discussion Starter #1
I saw that thread were the 4 runner had the sheet metal insert where the rear seat would go thus making it a box. Has anyone done this to more recent Runners? I want to go down to just three seats. But it'd be nice to see some ideas of how to sheet it in. I would probably do the drivers side back seat so the one passenegr would have more room, thus I would require access to the fuel pump under that seat...
 

·
Registered
Joined
·
4,031 Posts
I think he means taking out one of the rear seats and using that indented area for storage but I like your idea better. That one of my next mods except my box will be a bit smaller. I only have enough room to barely squeeze a cooler between my seat and my tailgate.
 

·
Premium Member
Joined
·
23,549 Posts
i took my rear seats out and built a frame off of the lower hinges. it is made out of 1/2" square tubing and skinned with 16 ga sheet. it is two halves, with each side using two of the hinges. i don't have any pictures tho. i made it flush with the rest of the bed so i could sleep back there. there is not alot of room under it but it works great for things like tarps, tie down straps and other things used less often.
 

·
Premium Member
Joined
·
23,549 Posts
toy4crawlin said:
Where can I get a box like this?

other than trying to find a Electrical Fuse panel can ?

I need a safe, unseen box for my OPEN 4 runner

make one?
 

·
Registered
Joined
·
4,031 Posts
How about the recycling place at the dumps or some type of salvage yard. maybe a piece of a filing cabinet or something?
 

·
Registered
Joined
·
2,086 Posts
Discussion Starter #8 (Edited)
300 sniper has the right Idea I was asking about, but thanks rick, that helps too!. I may have to try building that first, specs on the box you added?

*edit* sorry rick, just reading that link, killer idea.
 
1 - 8 of 8 Posts
Top