Pirate 4x4 banner
1 - 3 of 3 Posts

· Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Has anyone here mounted their windshield to their roll cage? Currently I have a solid 8 point cage, a good front bumper, and a stinger up front. The plan is to tie a front exo into the stinger and the interior 8 point cage (plan in blue). Currently im having a problem with the window frame flexing for obvious reasons. I want to brace the A pillar into the window frame, but I think a better looking, stronger, more practical thing to do is tube the a pillar and tie it into the cage and gusset it. If I do this my windshield would have to be mounted onto the exo/ tubed A pillar. I would probably do 2 coats of polyurethane under the glass to get a nice thick gasket. Im wondering if I hit the side of the exo or front of the cage if I will break the window. I realize it will brake every time I roll, and more than likely if I hit the A pillar on something.

Anyone ever seen this or have any personally experience?
 

· Registered
Joined
·
17 Posts
Discussion Starter · #7 ·
I have searched, and its not a tj, so that looking at Poisen Spider TJ cage kits isnt really going to help me.
Im looking for into on anyone who has done this, I dont care XJ, CJ, WJ, JK... this fourm has more Jeep people and more chopped rigs, which is why I came looking here.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top