[twinger1]

I am trying to move my front axle forward by drilling my spring perches, I am also going to be installing a ubolt flip kit at the same time. I am looking for any advice or a write up or pitfalls that I need to avoid. Im sure info is out there I just can't find it. So bring on the flame fest and hopefully some good info at the same time. Thanks!

 

[twinger1]

I do have crossover steering and I have heard a lot about this mod but I am a cautious person and always want to be sure of what I am doing before I attemp a new mod. Thank you for all of the responses. One big question is how do I match the ubolt plates to the holes in the perches?

 

[twinger1]

Thanks for the help, I understand this was a fairly dumb question. I also have a fuel cell question. I have a RCI cell with one outlet and one tap for a tip over valve. How do I plumb a fuel cell to a 22RE with only two ports?