Pirate 4x4 banner
1 - 1 of 18 Posts

· Registered
52 Posts
I have a high steer kit on mine and just finished moving my axle forward. I had to move my steering box the same amount. It required a small amount of clearancing the core support and welding tube in the frame where the bolts mount. I also clocked the steering box slightly up to get a better angle on the steering shaft. The top bolt ended up being about 1/2" from the top of the frame. .
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.