Pirate 4x4 banner
1 - 15 of 15 Posts

· Registered
Joined
·
130 Posts
Discussion Starter · #1 · (Edited)
Front is an 88 ford high pinion king pin dana 60 that has had 5" taken out of the long side to bring it to 64.25 inch wms-wms 4.10 gears axleshaft still needs to be shortened cost $75 to do it. Has superwinch lockouts. Will need king pins rebuilt, U joints and brakes.
Rear is a Cab and Chassis 14 bolt with 4.10 gears. 63.5 inch wms-wms both have 1350 yokes $1250

Also have a crossover arm tappered for TRE for additional $70

Ruffstuff 14 bolt simple swap kit add $100
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top