[ricochet]

I'm in the process of putting in a 360 into a wrangler using AA custom mounts. What is a good angle to mount the motor?

 

[Suprsizit]

I always shoot for a level carb mounting base, with the frame section between the axles level. This will generally give something between 2* to 5* down on the trans out put.

 

[NAS-NAS]

if this is a fuel injection motor, the engine is supposed to sit angled slightly back at about 3-5 deg.

Good luck!

 

[ricochet]

Thanks for the replies. I'll shoot for those numbers.