[JohhnyAppleseed]

does anybody know how hard it will be to weld these on?


http://cgi.ebay.com/ebaymotors/JEEP-COMPASS-DOOR-SILL-GUARDS-2007-2008_W0QQcmdZViewItemQQcategoryZ33642QQihZ013QQitemZ230260496634QQrdZ1QQsspagenameZWDVW

 

[TotalImmortal]

end yourself.

 

[BadTJ]

does anybody know how hard it will be to weld these on?


http://cgi.ebay.com/ebaymotors/JEEP-COMPASS-DOOR-SILL-GUARDS-2007-2008_W0QQcmdZViewItemQQcategoryZ33642QQihZ013QQitemZ230260496634QQrdZ1QQsspagenameZWDVW

your gonna need to fab a bracket to tie those into the frame.

 

[JohhnyAppleseed]

your gonna need to fab a bracket to tie those into the frame.

thanks badtj

 

[Blackjeep2]

I wouldn't touch it unless you really know what your doing. You might screw up the flux capictor trying to weld those on!!!!

 

[djljeep]

i know my flux capacitor is all shot to hell after i welded in my HARDCORE CHROMED PLASTIC entry gaurd

good luck to you

 

[mrtoddb]

i know my flux capacitor is all shot to hell after i welded in my HARDCORE CHROMED PLASTIC entry gaurd

good luck to you

Wow, hardcore on a whole new level...:|

 

[Zachs]

holy shit... I hope to be good enough one day to weld molded plastic seemlessly to the body. :-/

 

[howyadoin]

does anybody know how hard it will be to weld these on?


http://cgi.ebay.com/ebaymotors/JEEP-COMPASS-DOOR-SILL-GUARDS-2007-2008_W0QQcmdZViewItemQQcategoryZ33642QQihZ013QQitemZ230260496634QQrdZ1QQsspagenameZWDVW

After viewing your other posts on this board, I believe it is safe to say that you are a complete waste of oxygen.:shaking: