Pirate 4x4 banner

1 - 11 of 11 Posts

·
Registered
Joined
·
1,754 Posts
Discussion Starter #1
Does anyone know where I can find one of these. Every auto parts store and hardware store in town has told me I am SOL and after searching the web for half an hour I have found nothing.
Its a brake fitting that screws into the master cylinder and then Ts out for 2 brake lines, it also has a port in the bottom for a brake light switch
 

Attachments

·
Registered
Joined
·
1,754 Posts
Discussion Starter #2
Here it is assembled I realy only need the center piece
 

Attachments

·
IH/Rover Moderator
Joined
·
20,917 Posts

·
Registered
Joined
·
3,804 Posts
hahaha........

that "V" peice in the middle is an International-truck part.

at least on both of my "Load-Star" 1600/1700's anyway.

its for the front brakes..... I'll try and check my truck tonite

at home and get back tommorow......

--Sherpa
 

·
Registered
Joined
·
1,042 Posts
Try Porterace in Ventura Ca. ( 805 ) 385-race. Talk to Ray Porter and tell him what you need. If i have ever needed a part or fitting he has it or can make it.
 

·
Registered
Joined
·
4,489 Posts
Weezer said:
Here it is assembled I realy only need the center piece
The male fitting and the 2 females on the Y block look like 37° inverted flares. The female appears to be 1/8 pipe
 

·
Registered
Joined
·
1,754 Posts
Discussion Starter #10
thanks for the help guys, keep it coming:D
 
1 - 11 of 11 Posts
Top