[AndrewH]

my buddy is selling an nv4500 for 600 bucks cdn. but the it is the 2 wheel drive HD version so it won't bolt up to a dana300 easily (adapter needed) is it worth and how much am i looking at to get it bolted up to my 4.0L and a cj d300. thanks

 

[Charly]

What did it come out of and what year is it......or more specifically what's the output's spline count?

If it is 23 splines, then all you need is a tailhousing (can be found used for pretty cheap) and a bearing retainer.

Charly

 

[SweetCJ7]

Sounds like a deal. You can get the adapters cheap. The trick is going to be moving you motor forward and the rear back far enough to get a drive shaft in there. <IMG SRC="smilies/biggrin.gif" border="0">

[ 10-11-2001: Message edited by: SweetCJ7 ]