Pirate 4x4 banner
1 - 2 of 2 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter · #1 ·
I am bulbing an onboard air system using a york compressor.I pluged the oil gallery between the suction side and the crank seal and i still have a problem with a lot of oil from the discharge side.When all else fails ask questions help <IMG SRC="smilies/question.gif" border="0"> <IMG SRC="smilies/question.gif" border="0"> <IMG SRC="smilies/question.gif" border="0"> <IMG SRC="smilies/question.gif" border="0"> <IMG SRC="smilies/question.gif" border="0"> <IMG SRC="smilies/confused.gif" border="0"> <IMG SRC="smilies/confused.gif" border="0">

[ 10-24-2001: Message edited by: 4x4danno ]
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #3 ·
About 4 to 5 oz.s in a 30 min. run time.The oil I am useing is a 30 wt synthetic aprox. 10 oz.s in crank case <IMG SRC="smilies/confused.gif" border="0"> <IMG SRC="smilies/confused.gif" border="0"> <IMG SRC="smilies/confused.gif" border="0">
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top