Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
781 Posts
Discussion Starter #1
I keep seeing people post how good the replacement springs from Jc W are and I am surprised. I was building a cj7 with a friend last year and that is the springs he bought and we ramped them here on my tree ramp and I wrapped both rears perminently with one throttle womp. Those were the HD rears with more leaves than normal so he got more thinking manf. defect and did the same thing. I dont know where he got the last pair but we installed an anti-wrap bar at the same time and no problems. I know Wranglers wrap easy but I thought that was pretty weak. We couldnt even get a breakin run on the newest springs before the wrap bar went on.
 

·
Registered
Joined
·
643 Posts
So your saying the 7 leaf CJ springs are the ones <IMG SRC="smilies/confused.gif" border="0">

Come awn people how many times does this have to be brought up till it sinks in......

<IMG SRC="smilies/flipoff.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0">
 

·
Registered
Joined
·
766 Posts
I think that you just need a anti-wrap bar no matter what if you go SOA... Otherwise you are just delaying the inevitable. (that is if you just use an extra leaf in the pack or some other weak way of preventing axle wrap...)
 

·
Registered
Joined
·
781 Posts
Discussion Starter #5
Originally posted by Mike Knorr:
<STRONG>So your saying the 7 leaf CJ springs are the ones <IMG SRC="smilies/confused.gif" border="0">

Come awn people how many times does this have to be brought up till it sinks in......

<IMG SRC="smilies/flipoff.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0"></STRONG>
I dont remember asking a question about which spring to get dumbass

<IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">

I run blazer springs all around on my cj and they were great for four years without any wrap problems but in the last year they have lost one inch of arch and are wrapping in the rear so I am building a bar. I just saw the JC w. coment on another post and was curious if anyone else had that problem. I just takes one or two to ruin it for many..
 
1 - 5 of 5 Posts
Top