[Blue-Beard]

I was wondering if the ford nine inch 35 spline axles are the same as dana 60 35 spline shafts? I am interested in the size at the spline, pressure angle of splines, etc. Could you take a 35 spline d60 axle and put it into a 35 spline nine inch detroit?
Thanks

 

[EBSTEVE]

I have a Dana 60 S/F with 9" ends that is 35 splined with Moser 9" shafts in it. I was concerned and talked to Moser and they said that they were the same.
There are a bunch of guys here that have simular stuff.

 

[Blue-Beard]

thanks for the input.

 

[got 4wd]

EBSTEVE

what brake setup are you running, i am planning on converting my D60FF to a SF with 35 spline using 9" ends, now i am trying to find what disc brake setup people had done. i am thinking of adapting the tera motorsport kit.

 

[EBSTEVE]

I have the www.aa-mfg.com brackets, caddy calipers, Ford f150 rotors and chevy lines. I bought the calipers from a local pick and pull and everything else is new and I am about $125 or so in to the entire thing.
If you wnat any more info PM me

 

[66CJdean]

They can be different depending on whos parts you use. Mark Williams does sell 45* pressure angle splines and spools for the 9" but also has 30" like spicer uses. For the most part a 35 spline 9" will work in a semifloat 60 with 9" ends.

 

[Blue-Beard]

They can be different depending on whos parts you use. Mark Williams does sell 45* pressure angle splines and spools for the 9" but also has 30" like spicer uses. For the most part a 35 spline 9" will work in a semifloat 60 with 9" ends.

cool thanks dean.