Pirate 4x4 banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,819 Posts
Discussion Starter #1
Just talked to to advance adapters about putting an np435 into the ranger behind the 2.9 etc motors. They said they make nothing right now cause they haven't had much of a demand. If they had enough interested in doing something this they may be willing to do it. Said they need atleast 5 people to do it. Probably cost 3-400 dollers for the adpater. This is just to put it up to the motor you would have to figure out your own way to put a tcase on it. Probably a dana 20 or atlas on the back. Anyone interested in this that is will ing to put the money up on this. They are about 2 hours from me so I can go bye and see them in person and maybe use my truck for measurements

Matt

Edit: If you are serious about this email me and we can be able to work something out. [email protected]

[ 10-25-2001: Message edited by: RockRanger ]
 

·
Registered
Joined
·
1,819 Posts
Discussion Starter #3
I don't mind my 2.9 it has the power i need. Plus living in cali i need to use a FI motor and by they time that is done I will probably be looking atleast $2000 for it. Plus my tranny is going again and don't want to put another stock one in.

Matt
 

·
Registered
Joined
·
2,159 Posts
Originally posted by emsoffroad:
<STRONG>You could put that 302 in and not need any adapter.</STRONG>
WOOPTY DO 302... LALALA TRATATA, any true 4x4 goo ru, knows gearing is the way it goes <IMG SRC="smilies/thefinger.gif" border="0"> , so b4 you go shooting out HP, it aint all about HP its about gearing. HAVE A NICE DAY <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/smokin.gif" border="0">
 
1 - 4 of 4 Posts
Top