Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,566 Posts
yes its bolt right up send me an e-mail at [email protected] i have a few pictures, if i remember its 28'' long from front face of transmission to the rear yoke. mine is still bolted to the dodge i have not done the ford input shaft swap yet. the stock dodge adapter is 8'' long and i used a mid 80's transmission from a RAM with a 208 behind it ( same boltpattern ), whats realy cool is you could do this swap 2 ways you can swap the ford input in the dodge and use the dodge tranny, or swap the dodge rear main shaft into the ford tranney, but it has to be a 4-wheel drive model ( ford ) not a 2 wheel drive, it has a different bolt pattern.
the dodge 4-wheel drive and the ford 4-wheel have the same 4-bolt pattern ( rear ), jason.
 
1 - 1 of 1 Posts
Top