nv4500 into 86 clutch issues

686 Views 5 Replies 4 Participants Last post by g-wizz, Sep 1, 2014

binder man

Discussion Starter · Aug 31, 2014 (Edited)

Okay guys swapping a nv4500 into a 86 k3500 that was original 6.2/465/205 truck. Using 93 external slave have it all hooked up and bled. 6.2 flywheel and 6.5 clutch...the problem is you push the pedal down and it's hard as a brick. No compressing it what so ever. Yes the disk is the right way :flipoff2: what am I missing?

Save

1 - 1 of 6 Posts

g-wizz

· #6 · Sep 1, 2014

you should be able to cycle it a bit by hand with out the slave. just wrench or find some leverage. bet something is binding or bottoming out. even with the wrong size mc, you would still have a pedal that moved.

Save

1 - 1 of 6 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.