Pirate 4x4 banner
1 - 3 of 3 Posts

·
Registered
Joined
·
230 Posts
Discussion Starter · #1 ·
I just put my 5.0 in my eb and is seems to spit oil out the dipstick and leak down the side onto the starter. Any one got any ideas why this would be happening. I do have the old dipstick in there and yes the thing is roasted but the old 302 didnt leak oil there?
 

·
Registered
Joined
·
230 Posts
Discussion Starter · #4 ·
just a question, The mustabg intake has a pcv on the back of the intake that I hooked up to the vac, and I put one in on the valve cover cause the hole was there to put one there. Should I just vent one, or plug the one on the intake, or use some combo of both. Which one do I use and do I need to vent the other side, just give me a little clairification so I can get this done.
 

·
Registered
Joined
·
230 Posts
Discussion Starter · #8 ·
would there be any other symptoms other than the excess pressure, cause the motor runs like a purring kittten,
 
1 - 3 of 3 Posts
Top