Pirate 4x4 banner

1 - 1 of 1 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1 (Edited)
I raced this motor in my pure stock at Stockton 99 speedway. It's an Olds 350 bored .010 over with dished pistons, 3 angle valve job, double roller timing chain, freshened with new head gaskets midway through the race season. Comes with everything but carb. On the last race of the season, lap 13 of 15 the water temp started going up and the oil pressure staring going down. I blew the upper radiator hose going into the pits. The motor stopped and the bottom end froze up. I can rotate it with a BF breaker bar. The oil is still fresh, I always ran Mobil 1 synthetic. There is no oil/water mixed. It would probably only need bearings in the bottom end. I'm going to a Chevy motor next year. $100 E-mail for pictures or call for more details 707-249-6590 Scott...
 
1 - 1 of 1 Posts
Top