Pirate 4x4 banner
1 - 11 of 11 Posts

·
Registered
Joined
·
264 Posts
Discussion Starter · #1 ·
looking to swap out my stock scout arm for one of shorter length.

i know most everyone uses the waggy arm, but i have heard there is one shorter that will fit the box. ford maybe?

if so, anyone know what model/year i can get a pitman that will work, and is shorter than the waggy let me know.

i need to get the dimensions so that i can make my histeer arms next weekend.

gracias,
pat
 

·
Premium Member
Joined
·
5,990 Posts
No clearance problems! I'll post a pic in a little bit to show you;)

BTW- I'm using stock spring packs;)
 

·
Premium Member
Joined
·
5,012 Posts
hmmmm, looks good :beer:


nicer drop than the waggys or the dodge. Those two can get REALLY close to the frame...


do you recall the center to center distance of it?? Big TRE or small??
 

·
Registered
Joined
·
5,104 Posts
Drop Pitman Arm

I'm not sure how I could accomodate any more of a drop arm...





Or do I just get more flex than the rest of you? :D

And I was thinking I'd taken too much flex out by putting in the bump stops so low..
 

·
Registered
Joined
·
3,940 Posts
Re: Drop Pitman Arm

tsm1mt said:
I'm not sure how I could accomodate any more of a drop arm...





Or do I just get more flex than the rest of you? :D

And I was thinking I'd taken too much flex out by putting in the bump stops so low..

I think you just "get it" a little more than the rest of us!

Maybe it has something to do with jumping it at 40mph???? :D


On the tech side I measured my wagoneer pitman arm this morning and it had approx 1" of drop.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top