Pirate 4x4 banner

1 - 8 of 8 Posts

·
Registered
Joined
·
629 Posts
Discussion Starter #1
Does anyone have pics of how they mounted the toyota power steering box to the frame? Did you redrill the frame and sleve it? The measurements are close to the manual steering box, but not close enough.
 

·
Registered
Joined
·
462 Posts
Originally posted by nuttzack:
<STRONG>Does anyone have pics of how they mounted the toyota power steering box to the frame? Did you redrill the frame and sleve it? The measurements are close to the manual steering box, but not close enough.</STRONG>
If your using the celica box we have the braket needed for $20 to bolt it to the frame.
 

·
Registered
Joined
·
9,106 Posts
If you're talking about the IFS Toy box, I would HIGHLY recommend plating both sides of the frame, as well as sleeving all 3 bolts. Go with the early Celica u-joint instead of the rag joint, while yer at it <IMG SRC="smilies/grinpimp.gif" border="0">
 

·
Registered
Joined
·
314 Posts
Originally posted by 0ILBURNER:
<STRONG>If you're talking about the IFS Toy box, I would HIGHLY recommend plating both sides of the frame, as well as sleeving all 3 bolts. Go with the early Celica u-joint instead of the rag joint, while yer at it <IMG SRC="smilies/grinpimp.gif" border="0"></STRONG>
Heh Oily,
did you go w/ the IFS box?
- <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
629 Posts
Discussion Starter #6
I just went and got the celica set up. Are you runnin IFS set up? If so was it much work gettin it to fit and have ya had any prob's with it?
 

·
Registered
Joined
·
314 Posts
Originally posted by bobaki:
<STRONG> <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>
<IMG SRC="smilies/tongue.gif" border="0">added:... <IMG SRC="smilies/biggrin.gif" border="0">...geez bob-okee
<IMG SRC="smilies/tongue.gif" border="0"> look I padded to... <IMG SRC="smilies/biggrin.gif" border="0">
 
1 - 8 of 8 Posts
Top