Pirate 4x4 banner
1 - 1 of 1 Posts

· Old Rock Doc
1,689 Posts
Like Jason, I am not sure why you want hi-steer arms on a SUA. You can certainly get a drag link and tie rod made to fit any combination of metric and SAE TREs. The FJ80 TRE is 23mm (.90") in diameter, so you need DOM tubing 1.25" or larger to use it. For real strength, I like 1.375 o.d. DOM with a .375 wall. The difficult part of making tie rods and drag links like this is having the correct RH and LH taps or being able to cut the threads on a lathe.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.