Pirate 4x4 banner

1 - 2 of 2 Posts

·
Registered
Joined
·
159 Posts
Discussion Starter · #1 ·
I was a real jackass and I cut the wires to make cut off doors. EVERY wire is wired correctly! The fuse/circut breakers are ok, what else could it be? I did the search but it did not help. Please help me, it is getting cold and I need to get my windows up.

<IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0"> USA RULES <IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0">
 

·
Cranky Moderator
Joined
·
7,366 Posts
I hate to break the news to you, but every wire may not be correct. You may have a bad splice. You need to use a schematic and a Meter to check each wire across any splices you did. It's not something that can be guessed at, has to be trouble shot.

If you have any specific questions that would help here. Like, does anyone know if the yellow wire goes to the brown wire, etc.

If all you had to do is match exact colors, you either have a bad splice, or an open somewhere else, like I said, hard to say.

Good luck!
 
1 - 2 of 2 Posts
Top