[metchosin joe]

im having some issues getting my pressure plate to seat to the flywheel...im only finger tightening the bolts and i dont want to bust out the wrenches...theres a quarter inch space between the pressure plate and flywheel...and yes im using an alignment tool and no i dont think the disk is on backwards...no markings on it but the springs and all are facing the tranny...
anyone know whats going on

 

[gnob]

you wont be able to tighten it down by hand.

 

[metchosin joe]

i wasnt sure if i could or not...the haynes manuel said to only do it finger tight...i did them all up with a socket carfully...so my problem is figured out