Pirate 4x4 banner

1 - 20 of 454 Posts

·
Premium Member
Joined
·
5,187 Posts
Discussion Starter #2
It's a 1992 Cherokee, 165K miles, Five speed, 6 cylinder.

Stole it for $800! :smokin:

Just a little rust in the DS rocker and the PS rear wheel well.

Sits WAY low on some worn out springs...

Drivers side rocker height:



And another overall from the drivers side:

 

·
Premium Member
Joined
·
292 Posts
interesting that you went with a 2 door for a family wheeler. looking forward to following the build.

and congratulations, kids are awesome
 

·
Registered
Joined
·
815 Posts
Why hello, King Asshat. :flipoff2:


I guess you forgot I have an AX-15 ?



Too much :beer: clouding your memory? :laughing:



Other than looks ... there is no difference in 2 vs 4 door. But I'll give you that subjective point based on sympathy. :flipoff2:



Joe
 

·
Registered
Joined
·
3,114 Posts
I have a family xj that is a 2 door. I wish I had never done it. The car seats were a pain in the beginning and now I have to figure out how to get a cage in and still have access. Seriously I don't mean to rain on your parade but you'll be buch happier with a 4 door.

Congrats on baby.
 

·
Registered
Joined
·
1,327 Posts
Subscribed, for a buddy he just got a stroke of good news too.
 

·
Registered
Joined
·
3,114 Posts

·
Premium Member
Joined
·
5,187 Posts
Discussion Starter #16
Rocker Replacement Materials are ordered...

2’x4’x 3/16” hot rolled plate
1 stick 1 ½” x .187” wall DOM
48” of ¾” x .120” wall DOM
8’ of 2”x 8”x .25” wall Rectangular Tube
11’ of 4”x4”x .187” wall Square Tube
15’ of 2 ½” x 2 ½”x .187” wall Square Tube


:D :smokin:

Now I just need to find the time...

Joe, you gonna email me that guys contact info for picking up the parts tomorrow?

Let me know!

Chris
 

·
Registered
Joined
·
1,219 Posts
are you going to be doing boatsides or just a rocker replacement with the 2x4? if you are doing rocker replacement i would put 2x2 on top of the 2x4 to go inside the door sills. if thats what your doing with the 2.5 then i dont think it will fit. i did 2x2 on top of my 2x4 and it barely fit.
 

·
Premium Member
Joined
·
5,187 Posts
Discussion Starter #18
are you going to be doing boatsides or just a rocker replacement with the 2x4? if you are doing rocker replacement i would put 2x2 on top of the 2x4 to go inside the door sills. if thats what your doing with the 2.5 then i dont think it will fit. i did 2x2 on top of my 2x4 and it barely fit.
This ain't my first rodeo son!

I just did a four door with 2x6 for the rocker:



Mine will be slightly different.

Keep watching, the pics will explain everything.
 

·
Registered
Joined
·
1,219 Posts
alright. was just trying to give some advice if you were doing it the other way. this aint my first rodeo either.
 

·
Registered
Joined
·
1,219 Posts
this is how i did mine
 
1 - 20 of 454 Posts
Top