Pirate 4x4 banner

1 - 6 of 6 Posts

·
Registered
Joined
·
199 Posts
Discussion Starter #1
installing dual case adapter and found 1/4" ball bearing floating around inside the crawler box. Where does it go? thabks for the help.
 

·
Registered
Joined
·
1,656 Posts
on the main shaft, there is a washer that slides over that bearing, there is a provision in both the shaft and the washer. I am almost 95% postive you don't need it becasue you replace the main shaft with the one that comes with the kit
 

·
Registered
Joined
·
487 Posts
Yep, goes on the stock mainshaft as well as the new crawler box output shaft and keeps the thrust washer from spinning on the shaft. It is required!
 

·
Premium Member
Joined
·
5,906 Posts
The mainshaft has 3. Washer, speedo and oil pump. The crawler has 1. Washer only.

Scott
 

·
Registered
Joined
·
1,972 Posts
thanks for the help. It was actaully the ball the goes next to the spring the goes in the detent for the shift rail to hold it in gear.

Ryan
 
1 - 6 of 6 Posts
Top