Pirate 4x4 banner
1 - 1 of 1 Posts

362 Posts
Upper and lower control arm skids?
You mean the upper (frame end) mount of the lower control arms, right?
Curious to see what you come up with.
Me and a buddy trimmed and boxed my LCA frame end mounts with 1/4 inch.
The rear axle is Currie, and their LCA mounts have held up fine.
The front D30 (soon to be trashed any way - recently bent the housing) needed work - I boogered up the stock mounts so bad I had to cut them off and wend on some aftermarket ones, then box and skid those.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.