[DaleL]

To go from a 3.45 ratio to a 5.13 do I have to get a new carrier?

 

[Ant]

You have to get a new differential.

 

[Cochese]

I believe I read that all RC D60 frontends use the same carrier.

 

[Mike Knorr]

3.54's might use a different carrier. I know that a 4.10 gear set uses the same carrier as the 5.13's. But not sure on the 3.54.

 

[Gordon]

yep all the RC60's used the same carrier and it is the same carrier as the 3.54 standard rotation carrier.

 

[bigblaze]

same!yepp!

 

[DaleL]

It is 3.54 typed it wrong earlier

Thanks for the replies just got off the phone with a local gear house and accoriding to my Assy # it does take a different carrier and they also told me that on just about all Dana frt axles if you have a 4.10 now, your safe anything numerically lower requires a different carrier. Damn and I got my gears, locker and install kit and can't do crap with em till I get a carrier now. <IMG SRC="smilies/frown.gif" border="0">

 

[66CJdean]

RC60's use one one carrier and that is the high speed one ie: 3.54 and such so your 5.13's will fit just fine no new carrier needed. This is why the RC60 don't go to 7.17 like the standard 60's.

 

[DaleL]

Originally posted by 66CJdean:
<STRONG>RC60's use one one carrier and that is the high speed one ie: 3.54 and such so your 5.13's will fit just fine no new carrier needed. This is why the RC60 don't go to 7.17 like the standard 60's.</STRONG>

Talk to me like the idiot I am here what do you mean by high speed carrier?

 

[Ant]

Originally posted by 66CJdean:
<STRONG>RC60's use one one carrier and that is the high speed one ie: 3.54 and such so your 5.13's will fit just fine no new carrier needed. This is why the RC60 don't go to 7.17 like the standard 60's.</STRONG>

Ahhhhh..... Of course.... I never could figure that one out, that clears it up.