Pirate 4x4 banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1 (Edited)
I hope this is the right area. I re-geared the front end of my jeep with a problem, pattern was perfect. I just checked the pattern on my rear and its awful. The pinion is touching on the inside top corner of the drive side and the outside top corner of the coast side. I'm thinking my ring gear may be too far away but would love any help on this. My first re-gear so while the front worked out perfect im still a newb.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
Awesome, appreciate it a lot man.
 
1 - 3 of 3 Posts
Top