Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
781 Posts
Hi there Bill. Hope you guys had fun at Rimrock. We had fun fishing.
I want to say proportioning valve, but do you have a line lock on there at all> That is what it is doing.Where the calipers new with the kit or reman? Prop valves arent a one way valve anyway. So is the rotor the right one for the caliper, could the piston in the caliper be overextending itself out the bore, cocking and jamming until the pressure is released?It has to be something either locking the single rear line or a problem that both calipers share alike.Anyway enough guessing good luck I hope I was some help... <IMG SRC="smilies/smile.gif" border="0"> <IMG SRC="smilies/smile.gif" border="0">
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top