[jcruiser70]

Has anyone put discs on the rear of a 10 or 12 bolt rear end? If so, have you got a parts list?

 

[4x4realm]

you might want to look over at coloradok5.com I remember seeing something on disks over there

 

[poi-dog]

I'm in the process of finishing up a rr. disc. install on my corp. 14 fullfloater. I got the kit from; www.tsmmfg.com. Approx. $725. for the brackets, including the rr. Caddy calipers w/parking brake, porportioning valve & s.s. braided lines. I know they have it for your truck & a ton of other applications as well.

But, do a search, cause I believe there are other kits/brackets out there, like previously mentioned(ColoradoK5, Offroad Unlimited, etc.)

Hope this helps!

 

[45apc]

Disc Brakes

JC, I very rarely stop over here and hope I'm not out of line with this reply. You can find the kit for the 10/12 bolt axles at www.a-tron.net if your interested. These axles are not difficult to do but since they are not full floaters it does require mounting the rotor on the inside of the axle flange. That requires some other modifications to the rotor itself but that is taken care of in the kit. Hope this helps.

 

[charlo]

I got the kit from; www.tsmmfg.com. Approx. $725.

Kits be had a lot cheaper if you dont mind figuring out some stuff on your own. Discs for 14FF ran about $325, But chose not to use the eldo calipers.


Charlo

 

[76K5Blazer]

http://www.tsmmfg.com/General_Motors_truck_rear_axles.htm