Pirate 4x4 banner

1 - 1 of 1 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter #1
Am in the process of installing an ExtremeAire SevereDuty Compressor ...
(Continuous duty cycle - 3/4 horsepower motor - 30-amp draw at 35psi - 40-amp draw at 150psi - 4 cfm free flow rate - 150psi max working pressure)
mated to a 40litre air tank; my primary objective is to refill 36" tyres to 30PSI from 8PSI after wheeling, and secondary objective is to run basic air tools. Based upon this profile, what PSI would you recommend I maintain my tank at to:
1/ Reinflate tyres ASAP
2/ Maintain longevity of compressor.

I plan on using a regulator to adjust for air tools.

With thanks,
Leithfield.
 
1 - 1 of 1 Posts
Top