Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,162 Posts
The bushings from your stock control arms will work. I just did this to my Dad's Jeep this past weekend. Just press the old bushings out and press the stock bushing in, direct replacement and better quality bushing.
 

·
Registered
Joined
·
390 Posts
It is real difficult to get the bushings out without a press. I ended up drilling through one of mine until it resembled swiss cheese then pry/hammering it out.

Replacments are under $10 bucks at Pep Boys. Spicer Part #FB543 This includes a bushing inside the metal sleeve with a bolt hole sleeve of, I think, 9/16.
 
1 - 4 of 4 Posts
Top