Pirate 4x4 banner

1 - 20 of 29 Posts

·
Registered
Joined
·
27,885 Posts
Discussion Starter #1
heres some brutal rock sliders nick socha made me from dom tubing. check them out below and give him a buzz!!!

good stuff!!!!!

[ 09-18-2001: Message edited by: paul robert ryun: MTN GOAT ]
 

·
Registered
Joined
·
34,267 Posts
<IMG SRC="smilies/eek.gif" border="0"> <IMG SRC="smilies/eek.gif" border="0"> <IMG SRC="smilies/eek.gif" border="0"> <IMG SRC="smilies/fj.gif" border="0"> <IMG SRC="smilies/fj.gif" border="0"> <IMG SRC="smilies/fj.gif" border="0"> <IMG SRC="smilies/cool.gif" border="0"> <IMG SRC="smilies/glasses.gif" border="0">
 

·
Registered
Joined
·
27,885 Posts
Discussion Starter #5
Originally posted by crawlytoy:
<STRONG>nice 2-by <IMG SRC="smilies/thefinger.gif" border="0"></STRONG>
its 4-by now, thanks to jess @ high angle!!!!!! <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
244 Posts
How much did those set you back?

Milan
 

·
Super Moderator
'82 Scrambler, '14 Rzr
Joined
·
62,007 Posts
Originally posted by 85MudYoTa:
<STRONG>All-Pro Off Road should have gotten a patent on their rocksliders.</STRONG>
Why? they weren't the first.. won't be the last...
 

·
Registered
Joined
·
27,885 Posts
Discussion Starter #9
i actually asked him to make them like that, he does all shapes and sizes. hes a starving college student, this stuff pays his tuition, all pro already got hundreds of my dollars <IMG SRC="smilies/biggrin.gif" border="0">

i cant quote a price, except to say they are cheaper than those out there "storebought"..

[email protected]

email him with your tubing needs! he uses dom tubing and a jd squared bender <IMG SRC="smilies/smokin.gif" border="0">
 

·
Registered
Joined
·
21 Posts
Nice, where's he located? So I can see if shipping is an issue.

<IMG SRC="smilies/bounce.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0">
 

·
Registered
Joined
·
3,010 Posts
those look pretty <IMG SRC="smilies/rainbow.gif" border="0">

just kidding. they look pretty tuff!

almost <IMG SRC="smilies/nuke.gif" border="0"> proof! <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
27,885 Posts
Discussion Starter #16
whats up with that flex in the rear?? <IMG SRC="smilies/frown.gif" border="0"> those are allpro springs, i just got a set of 4 inch shackles off an old wagoneer at pick n pull, ill see if that double shackle idea pans out for me... <IMG SRC="smilies/rolleyes.gif" border="0">
 

·
Registered
Joined
·
3,032 Posts
Nice Budbuilt crossmember too!!!
 

·
Registered
Joined
·
12,996 Posts
Originally posted by paul robert ryun: MTN GOAT:
<STRONG>whats up with that flex in the rear?? <IMG SRC="smilies/frown.gif" border="0"> those are allpro springs, i just got a set of 4 inch shackles off an old wagoneer at pick n pull, ill see if that double shackle idea pans out for me... <IMG SRC="smilies/rolleyes.gif" border="0"></STRONG>
<font color="yellow">
Well, when you look at where the jack is, there's almost no weight on the rear axle right now. And the flexiest spring in the world can't be used as the fulcrum your axle pivots on - not if there's no force exerted on the axle. In other words: Go get some Chevy's or Waggys and they'll do that too.</font>
 

·
Registered
Joined
·
4,679 Posts
Originally posted by ToyFamily:
<STRONG><IMG width=640 height=480 SRC="http://www.pirate4x4.com/ubb/uploads/hi4run.jpg"></STRONG>
looks like your leaking a little oil <IMG SRC="smilies/tongue.gif" border="0">
 
1 - 20 of 29 Posts
Top