Pirate 4x4 banner
1 - 4 of 4 Posts

· Registered
Joined
·
185 Posts
Discussion Starter · #1 ·
ok...before you guys start yellin about doing a search, I have already been there, done that with very little luck. ok, I have a 96 ZR2 s-10 with a 4L60E and 233 t-case. are there any 4-1 kits available for this t-case and if so who makes it? I was thinkin that my t-case is the same as the 231, except that it is push button instead of lever activated...could be wrong, if so let me know! Are there any other t-cases availble that I could swap in to get that lower gear and be a bit stronger? Thanks in advance

Brian
 

· Registered
Joined
·
185 Posts
Discussion Starter · #3 ·
:flipoff2: how about you get a transmission? again:flipoff2:

my driveshaft is in the works, but free, takes time....the more you pay, the faster you get it....

Brian
 

· Registered
Joined
·
760 Posts
Get a 231 out of a 89-92-ish S-10. Bolts right up and you can use the early S-truck shifter. Not sure if the 4:1 is available for this case or not but with some machine work, a Jeep one could probably be adapted.

Did this swap with a '95, worked great and now the owner never has to worry about the "button" not working. (the Waggy dana 44 front with manual hubs helped too).
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top