Pirate 4x4 banner
1 - 2 of 2 Posts

·
Registered
Joined
·
18 Posts
A samurai is pretty basic to work on.. If you could do it no problem, you probably wouldnt have asked.

first remove the front clip, and wiring harness off the moter, lights etc. since its your first time mark the wires when you pull them so you can put it back together, brake lines, fuel lines yada yada yada, everything that connects the body to the frame. Soak the body mount bolts with a penetrarting lubricant before you start, you will probably still need heat to get them loose. Invite some friends over to help lift the body off. Its all common sense, have fun.
 

·
Registered
Joined
·
18 Posts
T urn each fastener in a clockwise direction (with the appropriate socket, screw driver etc.). You will need a 10m 12m 14m 17m and 19m sockets and wrenches. when the bolts and screws come off place them in a bucket. keep taking bolts off till the part comes off.. Come on take that shit apart, your wasting time! also invest in an impact screwdriver with a #3 phillips head.

the only way you will understand is to getter done

:flipoff2:
 
1 - 2 of 2 Posts
Top