Pirate 4x4 banner

1 - 2 of 2 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter #1
this might be long, but here goes

Right now I am halfway into an SAS on my 90 yota. I am doing rears up front and chevies in the rear, but I have just come to realize that my 4" lift skyjacker rears are a little worn. Even though they are only about a year and a half old or so, they have settled to be 47" instead of 45". This puts me in somewhat of dilemma, seeing as how it puts my shackle mount about 1.5" behind the body mount, even with the front hanger moved forward an inch. My question is, will the AP shackle mount jigs work even behind the body mount? I think it should because the frame is at the same angle there as it is between the body mount, but I would have to do more backspacing on the shackle tube. Is this right?
 

·
Registered
Joined
·
65 Posts
Discussion Starter #2
Also, my pinion angle is somewhat crappy (-5-6*) and I was wondering if shims mess up the steering incredibly bad ,or what? I have marlin's high steer, so I don't think the tie rod or draglink would hit, not too sure?
 
1 - 2 of 2 Posts
Top