Pirate 4x4 banner

1 - 7 of 7 Posts

·
Registered
Joined
·
149 Posts
Discussion Starter #1
What year donner car/truck do you use for the SEFI conversion for a 302. Where is there some info on the conversion. Any information will help. Thank You Jes L.
 

·
Premium Member
Joined
·
7,489 Posts
Any Mustang from 86 and up is a popular donor car, the only changes were made were very simple. In 88 California cars, and 89 Federal cars the air metering system was changed to Mass Air flow, from a less accurate Speed Density, and in 96 they changed to the OHC 4.6L. Other than that, they are all the same.
 

·
Registered
Joined
·
357 Posts
Shell out some doe and get a GT40 intake for your 302, it will be wirth it in the long run!
 

·
Registered
Joined
·
182 Posts
Originally posted by NORK2BG:
<STRONG>What year donner car/truck do you use for the SEFI conversion for a 302. Where is there some info on the conversion. Any information will help. Thank You Jes L.</STRONG>
<IMG SRC="smilies/jester.gif" border="0"> I put a 89 Crown Vic 5.0 in my 76 Bronco and the installation was fairly easy . What tranny are you using ? If you need more info I would be glad to e-mail you some more details on the problems and the cures that I ran into .
 

·
Registered
Joined
·
149 Posts
Discussion Starter #7
Thanks guys I am running a NP-435 do I have to make sure I get a computer from a stick or does it matter. Also what about mass air verse speed density which one. Thank You
 
1 - 7 of 7 Posts
Top