Pirate 4x4 banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
2,255 Posts
Discussion Starter · #1 ·
ok, i have the whole axle apart, i just cant seem to get the hub and rotor apart. its an 84 solid yota front axle. i took two bolts out of the back of the rotor that were threaded into the hub. i am guessing they are just rusted together really bad, i have tryed prying them apart but that didnt work, am i missing something, i dont see anything else,


searched but didnt find anybody else that had this problem, do i just need to wack all of the lugs out first??
 

·
Registered
Joined
·
508 Posts
:rolleyes: :flipoff2: Wheel studs dude... wheel studs. Put a lug nut on to cover the threads and pound them out. If you have a press you can press them out too.
 

·
Super Moderator
'82 Scrambler, '14 Rzr
Joined
·
61,972 Posts
sacraficial lug nut, BFH - and yo are in the clear :)
 

·
Premium Member
Joined
·
2,255 Posts
Discussion Starter · #5 ·
thanks guys, i went out there right after i posted and took a hammer to them. took me a whopping 2.3 seconds to get them off. thats what i was gonna do anyways just wanted to check with the experts first.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top