Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
Joined
·
747 Posts
Discussion Starter · #1 ·
now that we have figures (see thread "shaft strengths"), what do we do with them? calculate traction torque limits for our rig. we need weight on axle (total weight with driver, passengers, tools, etc. x max weight transfer-usually .90 when rock crawling), coefficient of friction (COF), and tire radius(diameter divided by 2) to calculate this. some useful COF's are:
.1-.3 for mud
.3-.4 for hard dirt
.70 for dry rock
1.0 spike load on dry rock
1.0-1.5 sticky compound tire on rock?
take weight on axle and multiply by COF
multiply this by tire radius
divide by 12 to get traction torque limit.
this is the most torque your rig can deliver before tire slips, regardless of horsepower. if you have a lead foot on rocks use a high COF in you calculations, maybe 1.5 with stickies.
a few examples: my rig with driver at trail weight of 3380lbs. and 39" baja belted's: 4943 lb/ft. on rock
2500lb samurai with 31's: 2906 lb/ft
2500lb samurai with 35's: 3281 lb/ft
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top