Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
I fought a shifter on np435 for about an hour, I couldn't figure out how to get it out. Can some one gimme the steps to removing it? Sorry if this is a newbie question but I have always worked on jeeps and haven't had experience with these.
 

·
Registered
Joined
·
127 Posts
Push down hard on the thing at bottom of stick,and turn to the left(counter-clockwise) I always make sure trans is in nuetral(sp).
 

·
Premium Member
Joined
·
19,786 Posts
Yup, the cup @ the bottom has a grrove in it
So you push down and turn it
 

·
Premium Member
Joined
·
5,991 Posts
I made a "tool" for the job. I use a 1x4x24" long piece of wood with a hole cut in the middle. Slip the tool over the shifter, push down and turn to the left. I know, it sounds dumb but, hey, it worked for me and I've used it several times.

And, like PTO Dave said, make sure it's in neutral.

Good luck!
 

·
Registered
Joined
·
4,719 Posts
I open up channel locks so they still ride on top but near the bottom of that collar and just press down on the channel locks and turn.
 
1 - 5 of 5 Posts
Top