Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,163 Posts
Discussion Starter · #1 ·
I may be gettin an 84 1ton dodge within the next week I want to get an idea of what kind of setup I want to run. I know that when leafs are done right they will flex every bit as much as coils. I plan on running atleast 38s, bare with me here Im an ex jeeper :flipoff2: Lets see what yall are running and how well you like the setup
 

·
Registered
Joined
·
37 Posts
well i got 8" skyjacker leafs up front and 5" superlift leafs in the rear with the stock 3" block. I HATE THESE SPRINGS!!!! im looking into a set of Alcans with a shackle reversal. what i got is stiff as hell it rides like a brick!!!! i made my shackle reversals from plans on ram charger central. i havent put them on yet cuz ive been to lazy to reset the pinion angle.
 

·
Registered
Joined
·
808 Posts
I built my front suspension very similar to PJTPW's, and it works great.
http://rockcharger.com/rcs/rockcharger/frontend.html

PJTPW's suspension.
http://www.pirate4x4.com/forum/showthread.php?s=&threadid=106016
http://www.pirate4x4.com/forum/showthread.php?s=&threadid=106938
http://www.pirate4x4.com/forum/showthread.php?s=&threadid=187592
http://www.pirate4x4.com/forum/showthread.php?s=&threadid=204268

I've also seen PJTPW's rig wheeling and his front and rear suspension work great.

For my own rear suspension, I used boxed RCC shackle flip brackets, mounted on the "wrong" sides to move the mounting point back and used longer 56" long Chevy springs with homemade 8" shackles. This also works very well for me.
http://rockcharger.com/rcs/rockcharger/tubswap.html
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top